Aluminium Billet

6000 & 7000 Series DC Cast & Fully Homogenized 100% C/O Vietnam ASTM / EN / JIS Certified

Premium Direct Chill (DC) Cast Aluminum Billet

Fully Homogenized Extrusion Billets Made in Vietnam with C/O & Anti-Dumping Tariff Protection

Efreso supplies high-precision Direct Chill (DC) Cast & Fully Homogenized Aluminum Billets engineered for high-speed, defect-free extrusion lines. Manufactured in Vietnam to strict international standards (ASTM B221, EN 573-3, JIS H4040, GB/T 3190), our billets feature ultra-fine grain structures, low gas porosity, and zero internal cracking.

With 100% Verified Made-in-Vietnam Certificates of Origin (C/O) (Form EUR.1, Form CPTPP, Form E, Form A/B), Efreso helps international aluminum extruders and tier-1 industrial manufacturers bypass high anti-dumping tariffs, optimize landed costs, and secure a resilient, sustainable raw material supply chain.

Request Export B2B Quote Download TDS & CoA Samples
Direct Chill DC Cast Aluminum Billets Stacked - Efreso Vietnam B2B Export

1. Technical Specifications & Metallurgical Data Sheet

Every aluminum billet produced by Efreso undergoes 100% Automated Homogenization and Ultrasonic Flaw Detection (UT) to ensure flawless internal integrity and optimum extrudability.

A. Chemical Composition (Standard Extrusion Alloys)

Alloy Series Si (%) Fe (%) Cu (%) Mn (%) Mg (%) Cr (%) Zn (%) Ti (%) Al (%)
AA 6063 0.20 – 0.60 ≤ 0.35 ≤ 0.10 ≤ 0.10 0.45 – 0.90 ≤ 0.10 ≤ 0.10 ≤ 0.10 Balance
AA 6005A 0.50 – 0.90 ≤ 0.35 ≤ 0.30 0.05 – 0.50 0.40 – 0.70 0.10 – 0.30 ≤ 0.20 ≤ 0.10 Balance
AA 6061 0.40 – 0.80 ≤ 0.70 0.15 – 0.40 ≤ 0.15 0.80 – 1.20 0.04 – 0.35 ≤ 0.25 ≤ 0.15 Balance
AA 6082 0.70 – 1.30 ≤ 0.50 ≤ 0.10 0.40 – 1.00 0.60 – 1.20 ≤ 0.25 ≤ 0.20 ≤ 0.10 Balance
AA 7075 ≤ 0.40 ≤ 0.50 1.20 – 2.00 ≤ 0.30 2.10 – 2.90 0.18 – 0.28 5.10 – 6.10 ≤ 0.20 Balance

* Custom alloy chemistries (Series 1000, 3000, 5000, 6000, 7000) can be formulated upon customer specification.

B. Dimensional & Physical Specifications

Available Diameters 3.5” (89mm), 4” (102mm), 4.5” (115mm), 5” (127mm), 6” (152mm), 7” (178mm), 8” (203mm), 9” (228mm), 10” (254mm), 12” (305mm)
Billet Length & Tolerances Cut-to-length from 500 mm up to 6,000 mm (Length Tolerances: ± 2 mm)
Casting & Heat Treatment Direct Chill (DC) Vertical Casting | 100% Fully Homogenized (State-of-the-art soaking thermal cycle + forced air cooling)
Hydrogen & Surface Quality Hydrogen Content: ≤ 0.12 ml / 100g Al | Smooth, crack-free surface, saw-cut face squareness < 1°
Standards & Country of Origin ASTM B221, EN 573-3, EN 755, JIS H4040, GB/T 3190 | Vietnam (100% Primary/Secondary Verified Billet Production)

2. Business Benefits & Value Proposition (FAB Framework)

A. 100% Homogenized Structure

Feature: Advanced thermal homogenization dissolves segregation phases and transforms coarse β-AlFeSi into fine, spherical α-AlFeSi.
Advantage: Lowers breakout pressure in extrusion presses and enables higher ram extrusion speeds (+15% – 25%).
Benefit: Significantly increases daily profile output, reduces extrusion die wear, and lowers unit production costs for extruders.

B. Certified Vietnam Origin

Feature: Full C/O documentation (Form EUR.1, Form CPTPP, Form E, Form A/B) issued directly by Vietnam trade authorities.
Advantage: Allows buyers in the US, EU, Canada, and Australia to source high-grade billets while remaining compliant with international trade laws.
Benefit: Mitigates punitive anti-dumping tariff exposure (saving up to 30% – 80% in duty penalties) and ensures uninterrupted customs clearance.

C. 100% Ultrasonic Testing & Ceramic Degassing

Feature: Inline liquid metal filtration coupled with 100% non-destructive ultrasonic flaw inspection per billet.
Advantage: Guarantees zero internal slag inclusions, pinholes, or center-burst micro-cracks before dispatch.
Benefit: Prevents catastrophic die breakage during high-pressure extrusion, minimizes profile surface streaks, and drops scrap rates below 1%.

3. Quality Assurance, Packaging & Export Logistics

Strict Metallurgical Quality Control

  • OES Chemical Analysis: Dual Optical Emission Spectrometry testing per cast heat before pouring.
  • Microstructure & Grain Size Testing: Optical microscopy analysis to verify grain refinement and 100% homogenization phase transformation.
  • Non-Destructive Testing (NDT): Ultrasonic defect inspection to Class A/B standards.
  • Independent Inspection: Pre-shipment quality, length, weight, and chemical verification available via SGS, Bureau Veritas, or Intertek.

Export Packaging & Delivery Terms

  • Packaging: Steel-strapped export bundles with plastic end-cap protection or heat-treated wooden saddles. Moisture-proof protective film wrapping applied for long-haul maritime shipping.
  • Identification: Each bundle carries a weatherproof thermal barcoded label detailing Alloy, Heat Number, Billet Diameter, Length, and Net/Gross Weight for 100% traceability.
  • Incoterms: FOB Vietnam Ports (Cat Lai, Hai Phong, Cai Mep), CFR, CIF, DDP to destination port.
  • Supply Capacity: High-capacity production lines supporting contract-based annual volume supply and flexible spot order fulfillments (MTS/MTO).

4. Accelerate Your Extrusion Efficiency with Efreso

Partner with Efreso to secure premium, fully homogenized aluminum billets that lower your press downtime and maximize your import duty benefits.

Get Your Customized Billet Quote Today Chat via WhatsApp
Email: vanloc@efreso.com Hotline: +84 769 112 358 Web: efreso.vn/contact